Guerrero 2018-05-10T11:24:38+00:00

THE GUERRERO

“In designing and shaping this board I wanted to bring a totally fresh approach to what CJ has been riding.  After making a few Nausea model’s in various sizes and with a few tweaks I had a solid idea what I wanted to do with this concept. The Guerrero model is something fresh and exciting.  Starting with the rocker used in the Dead Kooks Nausea model we added some extra curve in the front 18 inches giving a nice clean and consistent rocker curve improving hold on the nose, stable and fast trim from a forward position and precise control and drive from the rear.  The outline is a nod to some late 60’s Australian favorites, pulling in the ears out front and carrying width just behind center providing a nice hip to work from.  There is a pretty serious amount of concave that runs through the front third of the board, narrow and blended into the belly as it runs out into the rest of the board while not altering the rail line. The rails are a noticeably a little lower more a 60/40 running into a paneled V section leading into the fin with a dash of edge for control, direct feel underfoot and a little flair.” – Eden Saul

Sizes:
9’6″ x 23 1/8″ x 3 (73 L)
Width 12″ from nose: 17″
Width 12″ from tail: 15 13/16″

9’11” x 23 9/16″ x 3 3/16″ (82 L)
Width 12″ from nose: 17 3/8″
Width 12″ from tail: 15 7/8″

Construction:
Thunderbolt Silver

Single Fin System

Recommended Fin Set-up: Flying Diamonds Power Flex Fin

Shaper: Eden Saul

Xeon Fiberglass

  • Blend of traditional fiberglass and opaque pigment to give that classic look.
  • Flex characteristics… Most amount of flex out of all of our lamination process. Immediate addiction warning.
  • Traditional look with space-age feel.

Traditional Poly

  • Made the old fashion way with traditional fiberglass, polyurethane blank and resin.
  • We can shape, glass and color you up any custom or model you’d like.
  • Inquire through our contact page and we will get back to you in a timely fashion.
  • 6-8 weeks build time.

This board has such a special place in my heart. The conception of this design and the back to back wins I quickly had on it, sorta closed a chapter in my life. A chapter that started the day I put down the bottle and decided to take my life back. Those were scary moments realizing that my career was gone and I had to start over. At that point, I could have never envisioned winning the Duct Tape Invitational and Mexi Log Fest, but with hard work and luck on my side, I did.

When I got the invite to compete in the DTI I knew I needed a couple longboards that would handle a large variety of conditions. I rang up my long time brother, Eden Saul, and got to the drawing board. Eden had built me a few boards before so I had a good idea of what I wanted. I took elements from a few of my favorite boards to design this one. Nuuhiwa concave, wide Point back, 60/40 rails, flat tail with kick for noseriding. Basically, I took everything I know that works for me and rolled it into one Board. Can’t go wrong with the whole “turn like Nat, tip ride like Nuuhiwa” concept. Anyway….

Eden made the board from start to finish at home in Australia and brought it out to me a few days before my departure to Mexico. I spent the next couple days bonding with it at San O and Cardiff. I knew right away that it was magical. It did everything I had hoped and more. The more I pushed it the better it worked. A truly perfect surfboard.

Arriving in Mexico, the waves were huge so I had my doubts about logging in such conditions. I put my best foot forward and practiced every day. The board constantly surprised me and I just continued to gain confidence as I got more comfortable. The event rolled around and the surf dropped into the head high range. At that point, I was so confident I was just connecting and advancing through heats.

When it was all said and done, the magic Eden board and I came out on top. The moment I had worked and prayed for since my sobriety 6 years earlier. It was the sweetest feeling for so many reasons on so many levels. I had nothing left to prove to anyone and my families dreams for me were finally actualized. The most personal victory of my life and the appropriate time for me to walk away from competition for good….which I have decided to do.

Over the next few weeks of digesting the events, I knew that this design needed to be shared. I immediately got with Eden and started working out the details. We agreed on a couple design tweaks and the name Guerrero after the state in Mexico where I experienced my moment in the sun.

It’s with great thanks and gratitude that I get to share with you my life’s greatest moment and the most complete longboard I have ever ridden, the Guerrero. – CJ

Shop Now